> Can you do a proper screenshot please? I enjoy the tiger, but it is not the
> subject of the question.
What exactlty you would like to see? My problem is shown on the picture, the KMix panel shows the wrong PCM channel: capture instead of playback.
> To me it looks like false mapping. Perhaps you must provide the correct
> model setting to your audio driver if it is supported
> Identify your card here
> and write back with exact model. The one you cited (SB Audigy Rx) is not in
> the list.
I have this exact card: https://ipon.hu/webshop/product/creative_sound_blaster_audigy_rx/530747
> You can get the model by lspci | grep Audio if it is pci card or better
> cat /proc/asound/cards
root@Csabi:~# lspci | grep Audio
01:00.1 Audio device: NVIDIA Corporation GK208 HDMI/DP Audio Controller (rev a1)
The SB card does not appear like this. I do not use this at all and it does not appears if i hit F6 in alsamixer.
root@Csabi:~# lspci | grep audio
06:00.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
With small "a" the SB card appears but my card is not an Audigy 2.
root@Csabi:~# cat /proc/asound/cards
0 [Audigy2 ]: Audigy2 - SB Audigy 2 Value [Unknown]
SB Audigy 2 Value [Unknown] (rev.0, serial:0x10241102) at 0xaf00, irq 18
ALSA does not recognize the Rx card?
> From the screenshot I assume you have: Sound Blaster Audigy2 ZS Value, so
> perhaps this here helps:
I don't understand. How this helps me, there is no information in this article about the Audigy Rx false recognition as Audigy 2. The soundcoure module is exists at my machine.
However a quick search shows that other people has this problem too:
But i have no problem with the sound or the MIDI, everything works fine, it's just an erroneous channel show in KMix.
This article says it needs additional firmware: http://www.linux-hardware-guide.com/in/2014-08-26-creative-sound-blaster-audigy-rx-sb1550-7-1-sound-sound-card-pcieShould i install the Rx firmware? I installed alsa-firmware-loaders, but i have no firmware to the Rx.