On Sunday 23 August 2015 12:42:47 Lisi Reisz wrote:

> On Sunday 23 August 2015 17:11:10 Sl�vek Banko wrote:
> > Alternatively, you can temporarily switch to the preliminary stable
> > builds repository, where are now also R14.0.1 - compiled from
> > identical source packages as is on the official build farm.
>
> Strongly recommend this, but take out the word "temporarily".  I would
> have recommended it yesterday evening, but wasn't sure abouit
> switching repositories half way through updating.
>
> To get Sl�vek's name (and other "strange" non-American names) use
> kcharselect.
>
> Here is the entry you need.
>
> # Trinity preliminary stable builds
> deb http://mirror.xcer.cz/trinity-sb wheezy deps-r14 main-r14
>
> One line instead of the two (deps is included in the line):
> deb
> http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-r14.0.0/deb
>ian wheezy main
>
> deb
> http://ppa.quickbuild.pearsoncomputing.net/trinity/trinity-builddeps-r
>14.0.0/debian wheezy main
>
> Then away you go. Fast _and_ reliable.
>
> Lisi
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail:
> trinity-users-unsubscribe@... For additional
> commands, e-mail: trinity-users-help@... Read
> list messages on the web archive:
> http://trinity-users.pearsoncomputing.net/ Please remember not to
> top-post:
> http://trinity.pearsoncomputing.net/mailing_lists/#top-posting

It will get there eventually Lisi. I am not just killing time until now.  
Something has happened to the motor driver module in my lathe and now 
the spindle motor is dead.  The puzzlion thing is that there are leds on 
the port pins that do all this, and sometimes they indicate a normal 
signal headed down the cable, and sometimes they show zero activity.

But my back has stood in front of that machine long enough now that it 
doesn't feel like wrestling the 400 lb toolbox its sitting on, around to 
gain access to the driver.  Tomorrow maybe.  I did get the lock pin hole 
bore at 2 diameter,s and about .2" of the outer end of the hole tapped 
at 50 tpi for an arbitrary thread diameter, meaning I will also need to 
make the threaded plug that retains it.  But after I had mounted some 
5/8" rod and centered it within a thousanth, intending to make that 
threaded plug, but now the spindle motor's driver is on strike.

I swear at times if I didn't have bad luck, I wouldn't have any at all.
Thats the 80 year old Iowa farm kid in me, making do with whats in the 
iron pile by the back fence.  :)

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>